Home > Home Improvement > How to Seal a Driveway the Right Way

How to Seal a Driveway the Right Way

Comments are Off

Are you tired of standing in puddles after it rains? Do you hate the fact that water is collecting on the surface of your driveway? Do you want to know how to seal a driveway, so it doesn’t become dented?

Once your driveway is sealed, you’ll never have these problems again! Check out our quick and easy guide to learning the best way to seal a driveway.

Prep Your Driveway

It’s important to prep your asphalt driveway before sealing it. This means cleaning it of any dirt, debris, and stains. You can do this by power washing it, scrubbing it with a brush, and then rinsing it off. Once your driveway is clean, you can then seal it.

Make sure to use sealcoating that is specifically for driveways and follow the instructions on the package. Doing this will help protect your driveway from the elements and keep it looking its best.

Clip the Grass

It’s important to properly prep your driveway for sealing by trimming any overgrown grass along the edges. This will help ensure that you get a clean, even seal that lasts.

Use a sharp blade to avoid damaging the asphalt and be careful not to overdo it – you don’t want to create any bald spots. Once you’re finished, sweep up any loose grass clippings and you’re ready to start sealing!

Remove Grease and Dirt

To remove grease and dirt from your driveway, you’ll need to use a power washer or a garden hose with a nozzle attachment. Start by spraying down the entire driveway, using a back-and-forth motion.

Work in small sections so you don’t miss any spots. Once the entire driveway is wet, apply a degreaser to any areas that seem especially dirty. Let the degreaser sit for a few minutes, then power wash or hose off the driveway again.

If there are still some stubborn areas of dirt, you can scrub them with a brush before hosing off the driveway one last time. Once the driveway is clean, you’re ready to seal it.

Cut in Borders

This can be done with a garden hose and a stiff brush. Next, cut in the borders of the driveway with a spade or garden edger. This will create a clean line around the perimeter of the driveway.

Use a sealer to seal the entire surface of the driveway. Be sure to follow the instructions on the sealer packaging to ensure proper application.

Applying Sealant to the Field

The right way to seal a driveway is to first clean the surface of any dirt, debris, or oil. Next, use a putty knife or trowel to fill any cracks or voids with the asphalt repair mix.

Once the repair mix is dry, use a brush or squeegee to apply driveway sealer to the entire surface. For best results, wait for the sealer to dry completely before driving on the surface.

Learn More About How to Seal a Driveway

Sealing a driveway is an important part of keeping it looking like new. There are a few things to know before you start to seal a driveway, but the process is relatively simple.

Be sure to follow the directions on your chosen sealer, as each type is slightly different. You’ll want to work on a cool, dry day for the best results. With a little time and effort, your driveway will be sealed and look great.

Did you enjoy reading this article? If so, then be sure to check out the rest of our blog for more!